Combing the newly-acquired DFAM with the 0-Coast, the Doepfer beauty case, the Minibrute, a small mixer and two multifx stompboxes. That’s all there is to it.
Last weekend:
This weekend:
Lessons Learned:
Lessons learned: if you combine a Doepfer envelope on minimum attack with the (notoriously fast) Moog sequencer and multiply them, then an analogue limiter is slower.
— Moinlabs (@moinlabs) March 24, 2018
Also, tape noise is not an issue if you combine proper tape, deck, NR, stuff on the 2bus, and take care of gain staging.
— Moinlabs (@moinlabs) March 24, 2018
There's even more lessons learned: if you use an analog delay (or a model thereof), never forget that you turned up feedback, or you might wonder later where that noise is coming from.
— Moinlabs (@moinlabs) March 24, 2018
A sine VCO, a snappy envelope and a 2×8 step analogue sequencer is all you need for a bassline.
— Moinlabs (@moinlabs) March 24, 2018
And finally: independent of your musical education, once you hook up a few (semi-)modulars with a Volca, your music sounds like the stuff that's reportedly played in those clubs you don't go to.
— Moinlabs (@moinlabs) March 24, 2018
Moinsound's Blog 